HEIDENHAIN iTNC 530 (60642x-04) ISO programming - Manual (Page 624)

624 Tables and Overviews
18
.1
Gener
al
user
par
amet
ers
Locking soft key for
tables
MP7224.2
Do not lock the EDITING ON/OFF soft key:
%0000000
Lock the EDITING ON/OFF soft key for
 Without function: Bit 0 = 1
 Without function: Bit 1 = 1
 Tool tables: Bit 2 = 1
 Datum tables: Bit 3 = 1
 Pallet tables: Bit 4 = 1
 Without function: Bit 5 = 1
 Point tables: Bit 6 = 1
Configure pallet files MP7226.0
Pallet table inactive:
0
Number of pallets per pallet table: 1 to 255
Configuring datum
files
MP7226.1
Datum table inactive:
0
Number of datums per datum table: 1 to 255
Program length up to
which the LBL
numbers are checked
MP7229.0
Blocks
100 to 9999
Program length up to
which FK blocks are
checked
MP7229.1
Blocks
100 to 9999
Set the dialog
language
MP7230.0 to MP7230.3
English:
0
German: 1
Czech: 2
French: 3
Italian: 4
Spanish: 5
Portuguese: 6
Swedish: 7
Danish: 8
Finnish: 9
Dutch: 10
Polish: 11
Hungarian: 12
Reserved: 13
Russian (Cyrillic character set): 14 (only as of MC 422 B)
Chinese (simplified): 15 (only as of MC 422 B)
Chinese (traditional): 16 (only as of MC 422 B)
Slovenian: 17 (only as of MC 422 B)
Norwegian: 18 (only as of MC 422 B)
Slovak: 19 (only as of MC 422 B)
Korean: 21 (only as of MC 422 B)
Turkish: 23 (only as of MC 422 B)
Romanian: 24 (only as of MC 422 B)
Note: Estonian, Latvian, and Lithuanian are no longer supported. If MP7230 is set to one of these
languages, the TNC will display English dialog texts.
TNC displays, TNC editor