10 programming: miscellaneous functions – HEIDENHAIN iTNC 530 (60642x-04) ISO programming User Manual
Page 38
38
10.1 Entering miscellaneous functions M and STOP ..... 332
10.2 Miscellaneous functions for program run control, spindle and coolant ..... 333
10.3 Miscellaneous functions for coordinate data ..... 334
Programming machine-referenced coordinates: M91/M92 ..... 334
Activating the most recently entered reference point: M104 ..... 336
Moving to positions in a non-tilted coordinate system with a tilted working plane: M130 ..... 336
10.4 Miscellaneous functions for contouring behavior ..... 337
Smoothing corners: M90 ..... 337
Inserting a rounding arc between straight lines: M112 ..... 337
Do not include points when executing non-compensated line blocks: M124 ..... 338
Machining small contour steps: M97 ..... 339
Machining open contour corners: M98 ..... 341
Feed rate factor for plunging movements: M103 ..... 342
Feed rate in millimeters per spindle revolution: M136 ..... 343
Feed rate for circular arcs: M109/M110/M111 ..... 344
Calculating the radius-compensated path in advance (LOOK AHEAD): M120 ..... 345
Superimposing handwheel positioning during program run: M118 ..... 347
Retraction from the contour in the tool-axis direction: M140 ..... 348
Suppressing touch probe monitoring: M141 ..... 349
Deleting modal program information: M142 ..... 350
Deleting basic rotation: M143 ..... 350
Automatically retract tool from the contour at an NC stop: M148 ..... 351
Suppressing the limit switch message: M150 ..... 352
10.5 Miscellaneous functions for laser cutting machines ..... 353
Direct output of the programmed voltage: M200 ..... 353
Output of voltage as a function of distance: M201 ..... 353
Output of voltage as a function of speed: M202 ..... 354
Output of voltage as a function of time (time-dependent ramp): M203 ..... 354
Output of voltage as a function of time (time-dependent pulse): M204 ..... 354