HEIDENHAIN iTNC 530 (60642x-04) ISO programming - Manual (Page 10)

TNC
model,
sof
tw
ar
e
and
feat
ur
es
10
Intended place of operation
The TNC complies with the limits for a Class A device in accordance
with the specifications in EN 55022, and is intended for use primarily
in industrially-zoned areas.
Legal information
This product uses open source software. Further information is
available on the control under
 Programming and Editing operating mode
 MOD function
 LEGAL INFORMATION soft key
smarT.NC: Contour pocket on point
pattern smarT.NC Pilot
smarT.NC: Preview of contour
programs in the file manager smarT.NC Pilot
smarT.NC: Positioning strategy for
machining point patterns smarT.NC Pilot
FCL 2 functions Description
3-D line graphics Page 156
Virtual tool axis Page 536
USB support of block devices (memory
sticks, hard disks, CD-ROM drives) Page 134
Possibility of assigning different depths
to each subcontour in the contour
formula User’s Manual for
Cycles
Touch-probe cycle for global setting of
touch-probe parameters User’s Manual for
Touch Probe Cycles
smarT.NC: Graphic support of block
scan smarT.NC Pilot
smarT.NC: Coordinate transformation smarT.NC Pilot
smarT.NC: PLANE function smarT.NC Pilot
FCL 3 functions Description