HEIDENHAIN iTNC 530 (60642x-04) ISO programming - Manual (Page 622)

622 Tables and Overviews
18
.1
Gener
al
user
par
amet
ers
Coordinates of the TT 120 stylus center
relative to the machine datum
MP6580.0 (traverse range 1)
X axis
MP6580.1 (traverse range 1)
Y axis
MP6580.2 (traverse range 1)
Z axis
MP6581.0 (traverse range 2)
X axis
MP6581.1 (traverse range 2)
Y axis
MP6581.2 (traverse range 2)
Z axis
MP6582.0 (traverse range 3)
X axis
MP6582.1 (traverse range 3)
Y axis
MP6582.2 (traverse range 3)
Z axis
Monitoring the position of rotary axes and
parallel axes
MP6585
Function inactive:
0
Monitor axis positions, definable bit-coded for each axis: 1
Defining the rotary axes and parallel axes to
be monitored
MP6586.0
Do not monitor the position of the A axis:
0
Monitor the position of the A axis: 1
MP6586.1
Do not monitor the position of the B axis:
0
Monitor the position of the B axis: 1
MP6586.2
Do not monitor the position of the C axis:
0
Monitor the position of the C axis: 1
MP6586.3
Do not monitor the position of the U axis:
0
Monitor the position of the U axis: 1
MP6586.4
Do not monitor the position of the V axis:
0
Monitor the position of the V axis: 1
MP6586.5
Do not monitor the position of the W axis:
0
Monitor the position of the W axis: 1
KinematicsOpt: Tolerance limit for error
message in Optimization mode
MP6600
0.001 to 0.999
Touch probes