HEIDENHAIN iTNC 530 (60642x-04) ISO programming - Manual (Page 59)

HEIDENHAIN iTNC 530 59
1.
3
Pr
ogr
amming
the
first
par
t
 Move to contour point 4 : Enter the Y coordinate 5 and
save your entry with the END key
 Define the chamfer at contour point 4 : Enter the
chamfer width 20 mm and save with the END key
 Move to contour point 1 : Enter the X coordinate 5 and
save your entry with the END key
 Depart the contour: Define the rounding radius of the
departing arc
 Retract the tool: Press the orange axis key Z in order
to get clear in the tool axis, and enter the value for the
position to be approached, e.g. 250. Confirm with the
ENT key
 Confirm Radius comp.: RL/RR/no comp? by pressing
the ENT key: Do not activate the radius compensation
 Miscellaneous function M? Enter M2 to end the
program and confirm with the END key: The TNC
saves the entered positioning block
Further information on this topic
 Complete example with NC blocks: See "Example: Linear
movements and chamfers with Cartesian coordinates", page 229
 Creating a new program: See "Creating and writing programs", page
101
 Approaching/departing contours: See "Contour approach and
departure", page 216
 Programming contours: See "Overview of path functions", page 220
 Tool radius compensation: See "Tool radius compensation", page
206
 Miscellaneous functions (M): See "Miscellaneous functions for
program run control, spindle and coolant", page 333
27
0