HEIDENHAIN iTNC 530 (340 422) ISO programming - Manual (Page 525)

HEIDENHAIN iTNC 530 525
13.3 T
e
c
h
n
ical In
fo
rm
atio
n
Test Run graphics
Display modes Graphic simulation before a program run, even while another program is being run
n Plan view / projection in 3 planes / 3-D view
n Magnification of details
Interactive Programming
graphics
n
In the Programming and Editing mode, the contour of the NC blocks is drawn on
screen while they are being entered (2-D pencil-trace graphics), even while another
program is running
Program Run graphics
Display modes n Graphic simulation of real-time machining in plan view / projection in 3 planes / 3-D
view
Machining time
n
Calculating the machining time in the Test Run mode of operation
n
Display of the current machining time in the Program Run modes
Returning to the contour n Mid-program startup in any block in the program, returning the tool to the calculated
nominal position to continue machining
n Program interruption, contour departure and reapproach
Datum tables n Several datum tables
Pallet tables
n
Pallet tables (with as many entries as desired for the selection of pallets, NC programs
and datums) can be machined workpiece by workpiece or tool by tool
Touch probe cycles n Calibrating a touch probe
n Compensation of workpiece misalignment, manual or automatic
n Datum setting, manual or automatic
n Automatic workpiece measurement
n
Cycles for automatic tool measurement
Specifications
Components n MC 422 main computer
n CC 422 controller unit
n Keyboard
n
TFT 10.4-inch or 15.1-inch flat-panel display with soft keys
Program memory n Hard disk with at least 2 GB for NC programs
Input resolution and display
step
n
To 0.1 µm for linear axes
n
To 0.0001° for angular axes
Input range n Maximum 99 999.999 mm (3937 in.) or 99 999.999°
Interpolation
n
Line in 4 axes
o Line in 5 axes (subject to export permit) (software option 1)
n Arc in 2 axes
m Arc in 3 axes with tilted working plane (software option 1)
n Helix:
Combination of circular and linear motion
n
Spline:
Execution of splines (3rd degree polynomials)
User functions