HEIDENHAIN iTNC 530 (340 422) ISO programming - Manual (Page 516)

516 13 Tables and Overviews
13.1 Gener
a
l User P
a
ra
met
e
rs
Graphic simulation
without programmed
tool axis: Tool radius MP7315
0 to 99 999.9999 [mm]
Graphic simulation
without programmed
tool axis: Penetration
depth MP7316
0 to 99 999.9999 [mm]
Graphic simulation
without programmed
tool axis: M function
for start MP7317.0
0 to 88 (0: Function inactive)
Graphic simulation
without programmed
spindle axis: M
function for end MP7317.1
0 to 88 (0: Function inactive)
Screen saver
Enter the time after
which the TNC should
start the screen saver
MP7392
0 to 99 [min] (0: Function inactive)
Machining and program run
Effect of Cycle 11 SCALING FACTOR MP7410
SCALING FACTOR effective in 3 axes: 0
SCALING FACTOR effective in the working plane only: 1
Manage tool data/calibration data MP7411
Overwrite current tool data by the calibrated data from the 3-D touch
probe system: +0
Current tool data are retained: +1
Manage calibrated data in the calibration menu: +0
Manage calibrated data in the tool table: +2
TNC displays, TNC editor