HEIDENHAIN iTNC 530 (340 422) ISO programming - Manual (Page 101)

HEIDENHAIN iTNC 530 101
4.5 Cr
eating
and
W
riting
Pr
ogr
ams
Programming tool movements
To program a block, select an ISO function key on the alphabetic
keyboard. You can also use the gray contouring keys to get the
corresponding G code.
Example of a positioning block
Start block.
Enter the target coordinate for the X axis.
Enter the target coordinate for the Y axis, and go to
the next question with ENT.
Select tool movement without radius compensation:
Confirm with the ENT key or
To move the tool to the left or to the right of the
contour, select function G41 (to the left) or G42 (to
the right) by soft key.
Enter a feed rate of 750 mm/min for this path contour
and confirm with the ENT key.
Enter the desired miscellaneous function (e.g. M3
Spindle ON) and press the END key to terminate and
save the block.
Select the miscellaneous function the TNC displays in
the soft-key row.
The program-block window displays the following line:
You only need to make sure that capitalization is active.
COORDINATES ?
PATH OF THE CUTTER CENTER
FEED RATE ? F=
MISCELLANEOUS FUNCTION M?
N30 G01 G40 X+10 Y+5 F100 M3 *
1
10
5
40
750
3