HEIDENHAIN SW 54843x-02 DIN Programming - Manual (Page 559)

HEIDENHAIN MANUALplus 620, CNC PILOT 640 559
7.
6 F
u
ll-surf
ace mac
h
ining with TURN PLUS
Transferring the workpiece from the main
spindle to the opposing spindle
The subprogram for "transferring the workpiece from the main spindle
to the opposing spindle" is defined in the user parameter Parameter
list – complete rechucking
(standard program:
Rechuck_complete.ncs).
At the end of the machining sequence, define a machining step with
the rechucking main machining operation and the full-surface
machining
submachining operation.
In parameter D of the chucking equipment description, select the main
spindle for the first chucking equipment and the opposing spindle for
the second chucking equipment.
Parting and picking-off the workpiece with the
opposing spindle
The subprogram for "parting and picking-off with the opposing spindle"
is defined in the user parameter Parameter list – rechucking,
parting
(standard program: Rechuck_complete.ncs).
At the end of the machining sequence, define a machining step with
the parting main machining operation and the full-surface
machining
submachining operation.
In parameter D of the chucking equipment description, select the main
spindle for the first chucking equipment and the opposing spindle for
the second chucking equipment.
Example: Defining the chucking equipment
. . .
CHUCKING EQUIPMENT 1
H0 D0 R0 J80 K15 X120 Q4 V0
CHUCKING EQUIPMENT 2
H0 D3 R1 J15 K-15 X68 Q4 V0
. . .
Example: Defining the chucking equipment
. . .
CHUCKING EQUIPMENT 1
H0 D0 R0 J100 K15 X120 Q4 V0
CHUCKING EQUIPMENT 2
H0 D3 R1 J15 K-15 X68 Q4 V0
. . .