HEIDENHAIN SW 54843x-02 DIN Programming - Manual (Page 548)

548 TURN PLUS
7.
4 Mac
h
ining inf
o
rm
ation
Roughing limit in front of cutting limit
Example 1: The roughing limit (SU) is located in front of the cutting
limit, inside (SBI).
Abbreviations
 SBI: Cutting limit, inside
 SU: Roughing limitation (SU = sbl + ULI)
 sbl: Basic length of roughing cut ("deepest" point of inside contour)
 ULI: Overhang length, inside (machining parameter 4)
 nbl: Usable tool length (tool parameter)