HEIDENHAIN SW 54843x-02 DIN Programming - Manual (Page 533)

HEIDENHAIN MANUALplus 620, CNC PILOT 640 533
7.
2 A
u
to
matic w
o
rk
ing plan g
e
ner
a
tion (A
WG)
Editing and managing machining sequences
TURN PLUS uses the currently active machining sequence. You can
change the machining sequences and adapt them to your range of
parts.
Managing the machining sequence files:
To open the machining sequence:
 Select "TURN PLUS > Machining sequence > Open." TURN PLUS
opens the selection list with the machining sequence files.
 Select the desired file.
To save the machining sequence:
 Select "TURN PLUS > Machining sequence > Save as." TURN PLUS
opens the selection list with the machining sequence files.
 Enter a new file name or overwrite an existing file.
To create a default machining sequence:
 Select "TURN PLUS > Maching sequence >Save HEIDENHAIN
standard as..." TURN PLUS opens the selection list with the
machining sequence files.
 Enter a file name under which you wish to store the HEIDENHAIN
default machining sequence.
Editing a machining sequence
Position the cursor.
Select "TURN PLUS > Machining sequence > Line." Select the
function.
Inserting a new machining operation
To insert a new machining operation before the cursor position, select
"Insert above the line."
To insert a new machining operation after the cursor position, select
"To insert below the line, press Insert."
Moving a machining operation
Select "Move line upwards" or "Move line downwards."