Grass Valley PDR v.2.2 - Manual (Page 98)

Chapter 2 Using the Profile Configuration Manager
80 Profile Family
the bottom of the Configuration Manger window, you will see a graphic
representation of the installed boards. A key to the board representations is
shown in Table 3.
The video references shown in the Input Clocking tab—Video Input 1–4 —
correspond to the actual video boards installed, from left to right, as represented
at the bottom of the Configuration Manager window.
For example, a system that does not use all four available clock references
might be configured like this. In this specific example, shown in Table 4, you
have one analog composite board and one component analog board. The panel
in the tab shows System, Video Input 1, and Video Input 2.
Table 3. Board representation key
Board Tag Board Type
No. of Video
References
Vid I/O SDI VA Serial digital component video 2
Vid I CAV Component analog video 1
Vid I Cmpst Analog composite video 1
Table 4. Configuration example, two video input clocking sources
Board Tag Board Type
Board
Reference
Input Clock Reference
Vid I CAV Component analog video 1 Video Input 1
Vid I Cmpst Analog composite video 1 Video Input 2