Grass Valley PDR v.2.2 - Manual (Page 44)

Chapter 2 Using the Profile Configuration Manager
26 Profile Family
- Select the desired VITC lines by checking in the VITC Enable column for
the line. There is not a limit on the number of VITC lines.
- Click Close to close the Vertical Interval Line Programming dialog box.
• For serial digital component:
- From the Serial Digital Component Video Output dialog box, set the lines
where you want VITC in VITC Generator Line1 and VITC Generator
Line2.
- Verify VITC Generator Enable is checked. If not, click to toggle it.