Grass Valley PDR v.2.2 - Manual (Page 164)

Chapter 4 Using VdrPanel
146 Profile Family
- Compute from Field Number calculates the timecode directly from the
field number of the recorded video. New clips start at 00:00:00:00.
- TC Rec # displays the recorded timecode.
- Generator displays the timecode from the generator for the channel.
4. Set up the timecode generator used by the panel with the Timecode Generator
Settings group:
- Free Run causes the timecode generator to continue to advance regardless
of the current play or record mode of the panel.
- Freeze locks the timecode at the current value. The value does not advance
with time nor with changes in the play or record mode of the panel.
- Lock to Field Number causes the generator to output a timecode locked to
the current clip’s timecode. When the panel is in stop, the value freezes.
When the panel is in play or record, the timecode advances normally.
During rewind or reverse shuttle, the timecode runs backward.
- The Reset To button resets the timecode to the value entered in the box.
The generator can be set to this value when Free Run, Freeze, or Lock
to Field Number is selected.
5. Click Close when complete.