Grass Valley PDR v.2.2 - Manual (Page 281)

Censor Panel Controls
Profile Family 263
Pause pauses the playback channel. Click on Pause to toggle it off,
recalculate the new delay time, and resume playback.
NOTE: If playback is paused longer than the Largest Delay time, the
record channel can loop around and overtake the playback.
Censor Panel Controls
Figure 138 illustrates the controls on a censor panel.
Figure 138. Censor panel controls
Censor panel controls are described here:
1. Timecode displays the current timecode of the clip.
2. Bytes/Field displays the current compression rate applied to the clip. The
target compression rate is set through Controller | Configure .
6. Jog Slider Bar
7. Clip Position
Controls
2. Bytes/Field 1. Timecode
5. Censor Delay
Status
9. Clip Window
10. Clip Controls
3. Field Selection
4. Playback/E to E
8. Mark Controls