Grass Valley PDR v.2.2 - Manual (Page 175)

Loading and Playing a Clip
Profile Family 157
Loading and Playing a Clip
To load and play a clip:
1. Click in a panel to select it.
2. If the clip is already loaded, select it from the Clips box and go to step 7.
3. If the clip is not loaded, choose VideoClip | Load Clip to open the Load Clip
dialog box.
Figure 83. Load Clip dialog box
4. If the clip you want to load is on a different drive, select a different disk drive
in the Drive box.
5. Select the clip to load—Richter in this example.
6. Click OK .
7. Click the Play button in the selected Panel dialog box to begin playing the
clip.
8. The Normal , Loop , and Bounce functions determine how play back occurs: