Grass Valley PDR v.2.2 - Manual (Page 185)

Removing Marks
Profile Family 167
Removing Marks
To remove in and out marks from a clip:
1. Select a clip containing marks.
2. Click Remove In Mark to remove a mark-in point and reset the clip beginning
to the actual start of the clip.
3. Click Remove Out Mark to remove the mark-out point and reset the clip
ending to the actual end of the clip.
Setting Field Dominance for Marks
You can set field dominance so that a clip’s mark-in and mark-out points occur
at field 1 or field 2 of a given frame. By default, the field dominance is set so
that either field 1 or field 2 can be a mark-in or mark-out point. To change field
dominance:
1. Choose Options | Field Dominance . The Field Dominance dialog box appears
(Figure 91).
Figure 91. Field Dominance dialog box
2. Click Field 1 or Field 2 .
3. Click OK . The change takes effect immediately.
NOTE: The latest field dominance setting applies to all open panels.