Grass Valley PDR v.2.2 User Manual
Page 209
Starting and Exiting the Tool Box Editor
Profile Family
191
NOTE: You cannot specify both a project file and a remote Profile
machine in a command line at the same time.
Whenever you start the Tool Box Editor, a Hardware Communication program
is also started, if it is not already running. This program keeps track of the
Profile host file (profile.hst) which lists Profile systems on the network, as well
as remoting activities.
Figure 101. Hardware Communication message box
The Hardware Communication program tries to connect to a machine in the
project file (see “Project Files” on page 199). If there is no project file present,
you will automatically connect to the local machine. Otherwise, you will go to
the Connect to Machine dialog box (see Figure 106).