Configuring mip generation rules – H3C Technologies H3C S7500E Series Switches User Manual
Page 43
5-8
You cannot create a MEP if the MEP ID is not included in the MEP list of the corresponding service
instance.
Configuring MIP Generation Rules
As functional entities in a service instance, MIPs deal with LBM and LTM messages.
MIPs are generated on each port automatically according to related MIP generation rules. If a port has
no MIP, the system will check the MAs in each MD (from low to high levels), and follow the procedure
described in
to create or not to create MIPs (within a single VLAN):
Figure 5-5 Procedure of creating MIPs
You can choose appropriate MIP generation rules based on your network design.
Follow these steps to configure the rules for generating MIPs:
To do...
Use the command...
Remarks
Enter system view
system-view
—
Configure the rules for generating
MIPs
cfd mip-rule { explicit | default }
service-instance instance-id
Required
By default, neither MIPs nor the
rules for generating MIPs are
configured.