H3C Technologies H3C S7500E Series Switches - Manual (Page 27)

3-8
To do… Use the command… Remarks
Enter system view system-view —
Configure the errored frame event
detection interval
oam errored-frame period
period-value
Optional
1 second by default
Configure the errored frame event
triggering threshold
oam errored-frame threshold
threshold-value
Optional
1 by default
Configuring Errored Frame Period Event Detection
An errored frame period event occurs if the number of frame errors in specific number of received
frames exceeds the predefined threshold.
Follow these steps to configure errored frame period event detection:
To do… Use the command… Remarks
Enter system view system-view —
Configure the errored frame period
event detection period
oam errored-frame-period
period period-value
Optional
1000 milliseconds by default
Configure the errored frame period
event triggering threshold
oam errored-frame-period
threshold threshold-value
Optional
1 by default
Configuring Errored Frame Seconds Event Detection
An errored frame seconds event occurs when the number of error frame seconds detected on a port
over a detection interval exceeds the error threshold.
Follow these steps to configure errored frame seconds event detection:
To do… Use the command… Remarks
Enter system view system-view —
Configure the errored frame
seconds event detection interval
oam errored-frame-seconds
period period-value
Optional
60 second by default
Configure the errored frame
seconds event triggering threshold
oam errored-frame-seconds
threshold threshold-value
Optional
1 by default