H3C Technologies H3C S7500E Series Switches - Manual (Page 3)

Preface
The H3C S7500E documentation set includes 12 configuration guides, which describe the software
features for the H3C S7500E Series Ethernet Switches and guide you through the software
configuration procedures. These configuration guides also provide configuration examples to help you
apply software features to different network scenarios.
The High Availability Configuration Guide describes high availability fundamentals and configuration.
The high availability technologies include fault detection and fault failover. Failure detection
technologies focus on fault detection and isolation. Failover technologies focus on network recovery.
This preface includes:
z Audience
z Document Organization
z Conventions
z About the H3C S7500E Documentation Set
z Obtaining Documentation
z Documentation Feedback
Audience
This documentation is intended for:
z Network planners
z Field technical support and servicing engineers
z Network administrators working with the S7500E series
Document Organization
The High Availability Configuration Guide comprises these parts:
High Availability
Overview Active and Standby
Switchover Configuration Ethernet OAM
Configuration
CFD Configuration
DLDP Configuration RRPP Configuration Smart Link Configuration
Monitor Link
Configuration
VRRP Configuration BFD Configuration Track Configuration
Conventions
This section describes the conventions used in this documentation set.
Command conventions
Convention Description
Boldface Bold text represents commands and keywords that you enter literally as shown.
italic Italic text represents arguments that you replace with actual values.