Rpt building, N in, Figure 26 – H3C Technologies H3C S12500-X Series Switches User Manual
Page 76

66
BSR encapsulates the RP-set information in the bootstrap messages (BSMs) and floods the BSMs to the
entire PIM-SM domain.
Figure 26 Information exchange between C-RPs and BSR
Based on the information in the RP-set, all routers in the network can select the proper RP for a specific
multicast group based on the following rules:
1.
The C-RP that is designated to a smallest group range wins.
2.
If the C-RPs are designated to the same group range, the C-RP with the highest priority wins.
3.
If the C-RPs have the same priority, the C-RP with the largest hash value wins. The hash value is
calculated through the hash algorithm.
4.
If the C-RPs have the same hash value, the C-RP with the highest IP address wins.
RPT building
Figure 27 RPT building in a PIM-SM domain
As shown in
, the process of building an RPT is as follows:
- H3C S9800 Series Switches H3C S5560 Series Switches H3C S5130 Series Switches H3C S5120 Series Switches H3C S12500 Series Switches H3C SR8800 H3C SR6600-X H3C SR6600 H3C WX6000 Series Access Controllers H3C WX5000 Series Access Controllers H3C WX3000 Series Unified Switches H3C LSWM1WCM10 Access Controller Module H3C LSWM1WCM20 Access Controller Module H3C LSQM1WCMB0 Access Controller Module H3C LSRM1WCM2A1 Access Controller Module H3C LSBM1WCM2A0 Access Controller Module