Mld snooping configuration task list, Configuring basic mld snooping functions, Enabling mld snooping – H3C Technologies H3C S12500-X Series Switches User Manual
Page 120: Pim-ssm configuration task list, Configuration prerequisites, Enabling pim-sm

110
MLD snooping configuration task list
Task at a glance
Configuring basic MLD snooping functions
•
(Required.)
•
(Optional.)
Specifying the MLD snooping version
•
(Optional.)
Setting the maximum number of MLD snooping forwarding entries
•
(Optional.)
Configuring parameters for MLD queries and responses
Configuring MLD snooping port functions
•
(Optional.)
Setting aging timers for dynamic ports
•
(Optional.)
•
(Optional.)
Enabling MLD snooping fast-leave processing
Configuring MLD snooping policies
•
(Optional.)
Configuring an IPv6 multicast group filter
•
(Optional.)
Configuring IPv6 multicast source port filtering
•
(Optional.)
Enabling dropping unknown IPv6 multicast data
•
(Optional.)
Enabling MLD report suppression
•
(Optional.)
Setting the maximum number of IPv6 multicast groups on a port
•
(Optional.)
Enabling the IPv6 multicast group replacement function
For MLD snooping, the configurations made on a Layer 2 aggregate interface do not interfere with the
configurations made on its member ports, and they do not take part in aggregation calculations. The
configuration made on a member port of the aggregate group takes effect after the port leaves the
aggregate group.
Configuring basic MLD snooping functions
Before you configure basic MLD snooping functions, complete the following tasks:
•
Configure the corresponding VLANs.
•
Determine the MLD snooping version.
•
Determine the MLD last-listener query interval.
•
Determine the maximum response delay for MLD general queries.
Enabling MLD snooping
When you enable MLD snooping, follow these guidelines:
•
You must enable MLD snooping globally before you can enable it for a VLAN.
•
MLD snooping for a VLAN works only on the member ports in that VLAN.
You can enable MLD snooping for a VLAN in MLD-snooping view or in VLAN view. The two
configurations have the same priority level.
To enable MLD snooping for a VLAN in MLD-snooping view:
- H3C S9800 Series Switches H3C S5560 Series Switches H3C S5130 Series Switches H3C S5120 Series Switches H3C S12500 Series Switches H3C SR8800 H3C SR6600-X H3C SR6600 H3C WX6000 Series Access Controllers H3C WX5000 Series Access Controllers H3C WX3000 Series Unified Switches H3C LSWM1WCM10 Access Controller Module H3C LSWM1WCM20 Access Controller Module H3C LSQM1WCMB0 Access Controller Module H3C LSRM1WCM2A1 Access Controller Module H3C LSBM1WCM2A0 Access Controller Module