Welltech SPCI2S Intel NetStructure SS7 Boards - Manual (Page 9)

SS7 Programmer’s Manual for SPCI2, SPCI4 and CPM8 Issue 2 Page 9
The installation process automatically installs the device driver so the setup
program should be allowed to reboot the target machine installing the package.
Installation is now complete, although the device driver is not yet running. All the
files that the user will need to use have been installed in the c:\septel directory. It is
recommended that the user does not modify any files in this directory but instead
creates a working directory into which all the necessary files are copied.
If the machine is a development machine without any target boards then no further
installation is required.
2.2.2 Starting the device driver for Windows NT
The device driver is initially installed as ’Manual’, it must therefore be manually
started by a user with ’Administrator’ privilege using the following procedure:
1) Select the ’Control Panel’ (Start->Settings->Control Panel).
2) Select the ’Devices’ icon.
3) Scroll down the devices and select ’Septel’.
4) The driver can be started immediately by using the ’Start’ button from the
Devices dialogue box.
To automatically start the driver at system startup select the ’Automatic’ option from
the "Startup" menu. Note that the system must be re-started for this change to take
effect. It is strongly recommended that automatic startup is NOT enabled until
correct operation has first been verified using manual startup.
2.2.3 Starting the device driver for Windows 2000
The device driver is currently installed as ’Manual’, it must therefore be manually
started by a user with ’Administrator’ privilege using the following procedure:
1) Select the ’Control Panel’ (Start->Settings->Control Panel).
2) Select the ’System’ icon. In the "system properties" select the ’Hardware’ tab and
then select "Device manager". A ’tree’ of device nodes will be presented.
3) From the toolbar select "View -> ShowHiddenDevices": Open the "Non Plug and
Play Drivers" node/branch. The Septel driver should be displayed.
4) Right click on the "Septel" driver and select "Properties" and then select the
’Driver’ tab
5) The driver can be started immediately by selecting "start" in the "current status"
field.