Welltech SPCI2S Intel NetStructure SS7 Boards - Manual (Page 74)

SS7 Programmer’s Manual for SPCI2, SPCI4 and CPM8 Issue 2 Page 74
Parameter Description:
liu n_pri
The relative priority for each LIU using the values taken from the following
table:
Value Meaning
0 No change to the interface’s priority.
1-32
New priority value for the line interface. The value 1
indicates highest priority, 32 the lowest priority. If two
interfaces are given the same priority, the lowest-
numbered interface is used first.
255 Special value indicating that the line interface should not
be used for clock recovery.