Welltech SPCI2S Intel NetStructure SS7 Boards - Manual (Page 76)

SS7 Programmer’s Manual for SPCI2, SPCI4 and CPM8 Issue 2 Page 76
5.4.2 MTP Link Deactivation Request
Synopsis:
Primitive request sent to MTP3 3 module to deactivate an SS7 signalling link.
Message Format:
MESSAGE HEADER
FIELD NAME MEANING
type MTP_MSG_DEACT_SL (0xc30b)
id linkset_id * 256 + link_ref
src
Sending Module ID
dst MTP_TASK_ID
rsp_req
used to request a confirmation
hclass 0
status 0
err_info 0
len 0
Description:
This message is issued to the level 3 module to cause a signalling link to be
deactivated in accordance with the procedures in Q.704.
The confirmation message (if requested) will indicate success by a status of 0.
Note: Receipt of the confirmation message does NOT imply that the link is out
of service, only that the deactivation procedure has commenced.
Parameter Description:
linkset_id The link set identifier
Identifies the link set containing the link to be deactivated.
link_ref The link reference
Identifies which link is to be deactivated.