Welltech SPCI2S Intel NetStructure SS7 Boards - Manual (Page 103)

SS7 Programmer’s Manual for SPCI2, SPCI4 and CPM8 Issue 2 Page 103
A2.5 MTP User Part
Syntax: MTP_USER_PART
Example: MTP_USER_PART 0x0a 0x2d
Configuration of a local user part module (other than a user part which has its own config command
in config.txt)
The service indicator.
The module id of the user process.
NOTE: This command must not be used when the corresponding configuration commands are used
(ISUP_CONFIG, TUP_CONFIG etc) as these commands automatically perform the function of the
MTP_USER_PART command.