Welltech SPCI2S Intel NetStructure SS7 Boards User Manual
Page 68

SS7 Programmer’s Manual for SPCI2, SPCI4 and CPM8 Issue 2
Page 68
source_slot
The
source slot references the CT bus timeslot from which to connect or
disconnect to the local stream. The source slot value has the following ranges
depending on the CT bus speed.
CT bus speed
Source Slot range
4 Mb/s
0 .. 63
8 Mb/s
0 .. 128
dest_stream
The
destination stream references which of the CT bus streams should be used
as a destination for the data. The parameter takes values in the range 0…31.
dest_slot
The
destination slot references the CT bus timeslot to which a local stream
timeslot can be connected or disconnected. The destination slot value has the
same range as the
source slot.
pattern
The value of the fixed data to be generated. The value should be in the range 0
to 255. Typically the value might be 0xff for an all ones idle pattern or 0x2a for
an ITU-T E1 idle pattern.