Welltech SPCI2S Intel NetStructure SS7 Boards User Manual
Page 21
SS7 Programmer’s Manual for SPCI2, SPCI4 and CPM8 Issue 2
Page 21
It is next necessary to include FORK_PROCESS commands for all modules
running on the host computer. All systems require ssd, tick and tim binaries to be
run.
Therefore for Windows users, the following FORK_PROCESS commands are
mandatory:
FORK_PROCESS ssds.exe
FORK_PROCESS tim_nt.exe
FORK_PROCESS tick_nt.exe
For Linux, the following FORK_PROCESS commands are mandatory:
FORK_PROCESS ssds
FORK_PROCESS tim_lnx
FORK_PROCESS tick_lnx
For SOLARIS, the following FORK_PROCESS commands are mandatory:
FORK_PROCESS ssds
FORK_PROCESS tim_sol
FORK_PROCESS tick_sol
Finally FORK_PROCESS commands should be added for any other modules
running on the host (such as protocol modules, user’s application or diagnostic
utilities). For example:
FORK_PROCESS s7_mgt
FORK_PROCESS upe
FORK_PROCESS s7_log