Welltech SPCI2S Intel NetStructure SS7 Boards - Manual (Page 64)

SS7 Programmer’s Manual for SPCI2, SPCI4 and CPM8 Issue 2 Page 64
5.3.9 Reset Switch Request
Synopsis:
Resets the digital switch to its default state in accordance with the current
board configuration.
Message Format:
MESSAGE HEADER
FIELD NAME MEANING
type MVD_MSG_RESETSWX (0x7e00)
id 0
src Sending Module ID
dst MVD_TASK_ID (0x10)
rsp_req
used to request a confirmation
hclass 0
status 0
err_info 0
len 0
Description:
This message is sent to the board to reset the state of the digital cross connect
switch in accordance with the configuration set using the board configuration
message. All CT bus streams are tristated leaving just switch paths established
using the board configuration message (ie. signalling timeslots) in place.
The confirmation message (if requested) will indicate success by a status of 0.
On receipt of the confirmation message the operation to reset the switch will
have completed.