Skutch Electronics BA-1000 Technical Reference Manual - Manual (Page 14)

Version 6.15 Page 14
Put MASTER into
-- IDE Drive—
Now take the COPY disk out and put
(MASTER disk back in and keep swapping disks, as
indicated, until it finishes copying.
 Copy System
This screen lets you copy the system
information settings from one disk to another disk; it
will show the following:
1=Copy System
3=Next Option
NOTE: Make sure you have already formatted
the COPY IDE disk (See Prepare to Copy ). You
can tap the 1 to copy the prompts, or 3 to go to
the next screen.
If you tap the 1, it will show the following:
Put COPY into
-- IDE Drive—
Now take that MASTER disk out and insert the
COPY disk. After some initial setup, it will show
the following:
Put MASTER into
-- IDE Drive—
Now take the COPY disk out and put
(MASTER disk back in and keep swapping disks, as
indicated, until it finishes copying.
 Copy Num File
This screen lets you copy any of the number
files from one disk to another disk; it will show the
following:
1=Copy Num File
3=Next Option
NOTE: Make sure you have already formatted
the COPY IDE disk (See Prepare to Copy ). You
can tap the 1 to copy a number file, or 3 to go to
the next screen.
If you tap the 1, it will show the following:
Current File = 1
#=Next 0-9 or *
Enter 0 to 9 for number files 0 through 9,
* for the Do Not Dial List, or # to go to the next
screen.
If you choose to copy a file, it tells you to
remove the current disk, then it shows:
Put COPY into
-- IDE Drive—
Now take that MASTER disk out and insert the
COPY disk. After some initial setup, it will show
the following:
Put MASTER into
-- IDE Drive—
Now take the COPY disk out and put
(MASTER disk back in and keep swapping disks, as
indicated, until it finishes copying.
 Erase Main Msg
This screen lets you erase your main message
prompts and their backups; it will show the
following:
1=Erase Main msg
3=Next Option
You can tap the 1 to erase these prompts, or
3 to go to the next screen.
 Erase TAD Msg
This screen lets you erase your TAD message
prompt and its backup; it will show the following:
1=Erase TAD msg
3=Next Option
You can tap the 1 to erase these prompts, or
3 to go to the next screen.
 Restore Prompt
This screen lets you erase your main message
prompt and restore it from the backup; it will show
the following:
1=Restore Prompt
3=Next Option
You can tap the 1 to restore these prompts, or
3 to go to the next screen.