Skutch Electronics CK-1P5 - Manual

Page 1 of 4
"Telecommunication Products to solve Telecommunication Problems"
CK-1P5
Promotion-On-
Hold Module
For the Panasonic KX-TS4100,
KX-TG4200, and KX-TGS4300
Phones
1/8/2014--V4
Introduction
Thank you for purchasing the
Skutch CK-1P5 Promotion-
On-Hold Module for the
Panasonic KX-TGS4100, KX-
TG4200, and KX-TS4300 four
line phone family. The CK-
1P5 works ONLY with these
three phone models. The CK-
1P5 is a true plug and play
device. The unit does not
require any "Learning" to
operate. When a call is placed
ON HOLD from any one of the
phones, the ON HOLD caller
will hear the Promotion-On-
Hold audio. When the line is
re-answered, the audio
automatically stops. The CK-
1P5 requires an external Audio player to supply the audio.
Installation
The CK-1P5 can be installed on any one telephone, and it will work from all phones that
are within the family (The 3 Models ONLY).
1- Make sure that the surface on the telephone is clean and free of dust and/or oil.
Audio Cable (RCA to RCA)
3.5mm to RCA Adapter
Power Cube
Sensor Board
CK-1 Box
Flat Cable
CK-1P5 Installed on Phone