beautypg.com

Recording answering machine only prompt, Volume control, Standard msg playback – Skutch Electronics BA-1000 Technical Reference Manual User Manual

Page 19: Answer device msg playback

background image

Version 6.15

Page 19

Standard Msg Playback

To play the standard prompts, tap the 1 from

the following screen:

1=Standard Msg
3=Ans Device Msg

The system will then play all of the standard

prompt files, starting from 00, until it reaches the
end. It will show the following while playing each
file:

Playing Prompt
B#00 Escape=STOP

When the system reaches the end of the current

message prompt, it will show the code in the bottom
line as follows:

[Transfer Codes]
Get Number Input

When finished, the system will return you to the

MENU.

Answer Device Msg Playback

To play the answering device prompt, tap the

3 from the following screen:

1=Standard Msg
3=Ans Device Msg

The system will then play the answering device

prompt until it reaches the end. It will show the
following while playing the file:

Playing Prompt
B#00 Escape=STOP

When the system reaches the end of the prompt,

it will return you to the MENU.

Recording

Answering

Machine ONLY Prompt

The following steps allow you to record the

outgoing prompt for Answering Machine Only
Mode (

Answer Detect Mode=2

in * System Setup).

To record new prompts, tap the 1 from the
following screen:

1=Record 3=Play
2=Ans Device Msg

It will erase the old prompts and show the

following:

Erasing Prompts
- Please Wait –

When the old prompts have been completely

erased, the display will show:

Mic in & Press 1

Now insert your microphone, make sure you

have worked out your new message and practiced it,
then tap the 1 to start recording; the system will
give you a low, longer tone, then you can start
talking and the display will show:

-- Talk Now—
B#00 Escape=STOP

Now, start by recording “Sorry, wrong

number”; then press then release ~, the display will
show the following:

Get Response
0-9 or * #=Next

Now tap the # and record your main message

after the low, longer tone, and the display will show
the following:

-- Talk Now—
B#00 Escape=STOP

When you are done, tap the ~ to end

the prompt, or just be silent for the

Talk Pause

period (see * System Setup). The display will then
show:

Get Response
0-9 or * #=Next

Now enter 9 then #; the system will play the

prompt back to you then return you to the MENU.

NOTE: If you record a message,

and don’t talk at the end so the system
stops on its own, the system will
remove the silence at the end of the
message.

Volume Control

The play volume on the BA-1000 can be

increased by tapping the 9 button several times.

This manual is related to the following products: