beautypg.com

Skutch Electronics CK-4 User Manual

Introduction, Installation, Operation

background image

• Introduction

The CK-4 is our four-channel telephone line simulator with auto ring

up. This unit simulates four, individual, standard telephone company lines
and also DID lines (suffix digits not sent). This unit allows Voice Cards to
be used as information systems at malls, hotels, or even trade shows; and it
allows you to demonstrate Voice systems on a multi-line level.

• Installation

Just connect single line phones to the jacks labeled Phone Channels 1, 2,

3 and 4 (or for 2 line phones, use the 1&2 and 3&4 jacks). The jacks labeled
Voice Card (Ring Up) Channels 1, 2, 3 and 4 connect to single line voice
cards (or use the 1&2, 3&4 jacks to connect to 2 line voice cards). The unit
operates on standard 110VAC house power.

• Operation

Simply take a phone channel "OFF HOOK" and the CK-4 will

automatically connect you to the assigned Voice Card Channel; i.e. Phone 1
to Voice Card 1, Phone 2 to Voice Card 2, etc. Once connected, you will
have talk battery and you will be able to use the touch tones on your phone
for control codes as needed. When you finish, hang up the phone and the
CK-4 will immediately disconnect the Voice Card by giving it a "CPC" or
"WINK" disconnect signal. Each line is completely separated from the
others, and each phone will be routed directly to the corresponding VOICE
CARD channel. If the Voice Card goes “ON HOOK”, while the Phone is
still “OFF HOOK”, then you will get a Reorder signal to let you know the
phone needs to go “ON HOOK”. The Channel lights will show the
following:

Steady

Phone is “Off Hook”

Fast Flash

Voice Card is “Ringing”

Slow Flash

Phone is connected to Voice Card

Medium Flash

“Reorder” signal - Voice Card has “Hung Up”

• Option Switches

You can change the Option features at any time by changing the

switches according to the features you want.

Option features:

No Dial Tone;

Ring Back &

Reorder still

active

5 Seconds Dial

Tone; Ring

Back & Reorder

active

Only Loop

Current, no

audio signals

Switch 1

Off

On

Off

Switch 2

Off

Off

On

Tech Support - 916-786-6186

If you have any problems getting the unit to work properly feel free to

give us a call. Technical Support is available between the hours of 7:30 AM
and 4:30 PM Pacific Time, Monday through Friday.