Skutch Electronics CK-1P6 - Manual

Page 1 of 4
"Telecommunication Products to solve Telecommunication Problems"
CK-1P6
Promotion-On-Hold Module
(For Panasonic KX-TG9391T, KX-TG9392T)
Introduction
Thank you for purchasing the Skutch CK-1P6
Promotion-On-Hold Module. The CK-1P6 is a true plug
and play device. The unit does not require any "Learning"
to operate. When a call is placed ON
HOLD from the Corded set, or any one
of the cordless phones, the caller will
hear the Promotion-On-Hold audio.
When the line is re-answered, the audio
automatically stops. It's that simple!
Installation
1- Position the CK-1P6 black box under the base telephone with the jacks facing towards
the back of the phone. (See Fig. 1).
2- Connect the short modular cord [1&2 Phone on CK-1] to [LINE 1/2 on Phone].
3- Connect the audio cord from your audio source, to the AUDIO IN jack on the back of
the CK-1 box. For DIGITAL PLAYERS use the cable that comes with the player.
4- Connect a MOD cord from Telephone Wall Jack 1&2 to [1&2 Line on CK-1].
Black Box
Power Cube
CK-1P6 Components
Audio Cable
(For CD Players ONLY!)
Short Mod Cord (To Phone)
Sensor Cable
Sensor Board