Skutch Electronics CK-1P9 - Manual

Page 1 of 4
"Telecommunication Products to solve Telecommunication Problems"
CK-1P9
Promotion-On-Hold Module
For the Panasonic KX-TG9581B telephone
04/20/15
Introduction
Thank you for purchasing the Skutch CK-
1P9 Promotion-On-Hold Module for the
Panasonic KX-TG9581B two line expanded
phone system. This unit ONLY works with
one specific KX-TG9581B BASE phone,
and on all of the cordless units, KX-
TGA950 units, that are registered to that
specific BASE unit. It will NOT supply
promotion-on-hold to Cell Phone calls that
are Linked to this phone. This phone allows
you to register a maximum of 12 handsets to
the BASE phone. The CK-1P9 is a true plug
and play device. This unit requires an
external sound source such as a CD or
Digital Player to provide the Promotion-On-
Hold audio. When a call is placed ON
HOLD or TRANSFERRED to another
phone, from the base or any of the phone’s
cordless units, the ON HOLD caller will
hear the Promotion-On-Hold audio. When
the line is re-answered, the audio
automatically stops. It's that simple!
Installation
The SENSOR Board MUST be attached to the BASE phone or this unit will not function.
The Sensor board MUST completely cover the LINE 1 and LINE 2 buttons on the phone.
1- Make sure that the surface on the telephone is clean and free of dust and/or oil.
CK-1P9
Box
Power Cube
SENSOR Board
Flat Cable
Audio Cord
Adapter
CK1P9 Installed on KXTG9581B