Seaward ClareHAL - Manual (Page 74)

73
On Test Failure: (Two options)
• Failure Menu
This gives user the option of having a menu for a failure within an
automatic test sequence. The menu will give user the option of retrying
a failed test (Restart Test), revise Product detail (Restart Product), end
the test (End Product) and aborting the test on the product (Abort
Product).
• End Product
This will just end the test sequence immediately once Failure is
detected.
Test Type: (Three options)
• Any
This gives user the option of selecting from a test setting list each time
before any test is instigated.
• Barcode only
This option allows user to scan in a Barcode representation of any test
setting using a Barcode scanner.
• Fixed test Name (selected from test setting list e.g. Test 123)
This option allows user to keep to only one test setting for every test.
To change to a different test setting, select Setup & System
Configuration and then highlight test Name, press Green. Select a new
test Name from test setting list.
Otherwise select one of the two options above for more flexibility.
Comments:
• Never
This will not allow any comments recording after each test.
• Always
This will always allow user to enter comments after each test.
• On Pass
This will allow user to enter comments only when a test has
Passed.
• On Failure
This will allow user to enter comments only when a test has Failed.
After Test:
• Menu (Options)
This allows user to have the options to select New Test, Review
test results, Download test results or return to Main Menu after
each test.
• New Test
This option allows user to progress to the ‘Next’ (new) product test.
Your HAL tester