Name, User level, Startup mode – Seaward ClareHAL User Manual
Page 68: Beep on key press, Your hal tester
67
The settings can be customized as follows for each user requirement.
Name
Highlight user name and press Green to enter field variables editor. Use
the cursor key to highlight character and press IInsert to select each
desired option. Then press Green to accept changes.
User Level
Use the cursor key to highlight user level and press Green to select the
desired option:
Novice
- Selects the user level as a regular user. This provides an
average level of help information and additional warnings and prompts.
Advanced
- Selects the user level as an advanced user. This provides
a minimum level of help information and additional warnings and
prompts.
Startup Mode
Use the encoder to highlight a test mode on startup and press Green to
select the desired option.
Main Menu (Automatic Mode)
The Tester will start up in Automatic Mode, with the Tester displaying
the Main Menu.
Manual Mode
The Tester will start up in Manual Mode, with the Tester displaying the
Manual Test Selection Menu.
Beep on Key Press
Use the encoder to highlight a buzzer option and press Green to select
the Yes/No option. If Y
Yes is selected this option will beep each time a
key is pressed.
Your HAL tester