Seaward ClareHAL - Manual (Page 152)

151
SSSID_APP_NUMBER_HANDLING (Item_id = 48)
This read/write item is an 8-bit unsigned integer representing how to
generate the initially offered product/appliance test numbers within the
'new appliance' menu.
This item cannot be written unless the session is unrestricted.
Valid values are 0 through 2 inclusive. 0=show a blank
product/appliance number, 1=show the last used product/appliance
number, 2=show an incremented version of the last used
product/appliance number.
SSSID_COMMENTS_CONDITION (Item_id = 49)
This read/write item is an 8-bit unsigned integer representing whether
or not to request comments after completing a test.
This item cannot be written unless the session is unrestricted.
Valid values are in the range 0 through 3 inclusive. 0=always request
comments, 1=request comments when a product/appliance passes,
2=request comments when a product/appliance fails, 3=never request
comments.
SSSID_COMMENTS_DESIGNTRS (Item_id = 50)
Not Used
SSSID_AFTER_TEST_ACTION (Item_id = 51)
This read/write item is an 8-bit unsigned integer representing the action
to take uponcompleting an auto-mode test. This item cannot be written
unless the session is unrestricted.
Valid values are 0 through 2 inclusive. 0=show menu, 1=new test,
2=download then new test.
Your HAL tester