Seaward ClareHAL - Manual (Page 111)

110
‘R’ 240.0 240.0 240.0
‘S’ 300.0 300.0 300.0
‘T’ – ‘Y’ Not Used Not Used Not Used
‘Z’
Specifies the output
voltage is VARIABLE up to
the target voltage using
the rotary encoder. Initial
value is 0.00kV, digit 6 is
ignored whilst digit 7 is
acted upon once user
ends the variable voltage
phase (by pressing the
Start button).
Specifies an
infinite duration
hold time, until the
test is terminated.
The current output
voltage is used as
the start value for
the next ‘ramp to
target’ at the
beginning of the
next test.
“ Maintained “
Your HAL tester