Seaward ClareHAL - Manual (Page 46)

45
How to view (search) Test Results
To view test results stored in memory, press View Data fast key or use
the encoder to highlight the View Test Results option on the Main Menu
and press Green to display the following Search menu: -
Use the encoder to highlight the required search parameters and press
Green to select the desired search field. A ‘
* ’ denotes all product test
results related to the field parameter. To get Quick search pressing
Start Search now on the default screen without selecting any specifics
will display all results in the memory. Use Page Up/Down to see the full
list.
Search result through Product Number
Enter a Product number to search for the specific results. If the
Product number field is left blank then the character ‘ * ’ will be
inserted as default, indicating to search for all of the Products. Press
Start Search to begin. Alternatively use a Barcode scanner to enter a
specific product number for the search and press Start Search. A
search results will be displayed. A message No Records Found will be
shown when products number is incorrect or when other field’s data
could not be matched. If unsure use ‘
* ’ for the search.
Your HAL tester