Seaward ClareHAL - Manual (Page 147)

146
SSSID_TOTAL_TESTS (Item_id = 8)
This read-only item is an unsigned integer representing the total
number of electrical tests that have been tested by the tester. The
value will be returned using up to 4 bytes.
Many electrical tests may be performed for each product/appliance
tested. In manual mode it is possible to perform electrical tests without
beginning an appliance.
SSSID_LASTSVC_APPLIANCES (Item_id = 9)
This read-only item is an unsigned integer representing the total
number of products/appliances that had been tested by the tester up
to the time of the last service. The value will be returned using up to 4
bytes.
SSSID_LASTSVC_TESTS (Item_id = 10)
This read-only item is an unsigned integer representing the total
number of electrical tests that had been tested by the tester up to the
time of the last service. The value will be returned using up to 4 bytes.
SSSID_DATE_TIME (Item_id = 11)
This read/write item is a structure representing the tester's current date
and time.
When setting the date and time the tester will reject requests that
specify invalid dates and times.
SSSID_SELIDX_USER (Item_id = 20)
This read/write item is an 8-bit unsigned integer representing the index
of the currently selected user. This item is password protected if the
user list is password protected.
Valid values are in the range 0 through 19 inclusive.
SSSID_USER_NAME (Item_id = 21)
This read/write item is an array of strings representing the available
user names. This item is password protected if the user list is password
protected. Only a single user name can be read or written at a time.
The valid range of instances is 0 through 19.
Your HAL tester