Seaward ClareHAL - Manual (Page 45)

44
Sample Automatic Mode Meter Display
The screen will be similar to that for manual mode as described earlier.
However there are a number of extra features denoted as follow:-
I st line (18) – Product number
2 nd line (Toaster) - the Test type
3 rd line denotes the Test code Sequence number, in this case it has
only one level setup. A maximum of 5 levels could be setup.
4 th line denotes the specific test of a repeat loop being done. Shown
here 1/5 means 1 st test of FIVE test loops being carried out. This
corresponds to the circular icon with a number in the centre as
mentioned in Default sequence description.
⊕ 1 ⊕ (Hal 102) This denotes the active terminal output channel pairs
that the test voltage will conducted to.
Your HAL tester