Seaward ClareHAL - Manual (Page 153)

152
SSSID_SYS_FLAGS (Item_id = 52)
This read/write item is a 16-bit unsigned integer containing various
system settings flags.
This item cannot be written unless the session is unrestricted.
Bit 0, if set: date and time to be shown in American mm/dd/yyyy format
SSSID_PASSWD_PROTECT_FLAGS (Item_id = 53)
This read/write item is a 16-bit unsigned integer containing various
password protection flags.
This item cannot be written unless the session is unrestricted.
Bit 0 : PASSWD_PROTECT_DATE_TIME
Bit 1 : PASSWD_PROTECT_EDIT_USERS
Bit 2 : PASSWD_PROTECT_EDIT_SITE_LOC
Bit 3 : PASSWD_PROTECT_EDIT_PHONE
Bit 4 : PASSWD_PROTECT_CHANGE_USER
Bit 5 : PASSWD_PROTECT_CHANGE_SITE_LOC
Bit 6 : PASSWD_PROTECT_MANUAL_MODE
Bit 7 : PASSWD_PROTECT_REMOTE_MODE
Bit 8 : PASSWD_PROTECT_DOWNLOAD_MODE
Bit 9 : PASSWD_PROTECT_CLEAR_RESULTS
Bit 10 : PASSWD_PROTECT_CLEAR_UPLOAD
Bit 11 : PASSWD_PROTECT_BCPRINT_LISTS
SSSID_TEST_SELECTION (Item_id = 54)
This read/write item is an 8-bit unsigned integer representing the
restrictions to place uponthe ability to select items within the test
selection menu. This item cannot be written unless the session is
unrestricted.
Valid values are in the range 0 through 2 inclusive. 0=allow selection of
any test, 1=selection via barcode only, 2=fixed test selection.
SSSID_SELIDX_FIXED_TEST (Item_id = 55)
This read/write item is an 8-bit unsigned integer representing the test to
be used if fixed test selection is in force.
This item cannot be written unless the session is unrestricted.
Your HAL tester