Seaward ClareHAL - Manual (Page 23)

22
Editing User Level and Novice Mode
The Tester is delivered with the default setting of novice user level. To
change this setting: from the MAIN MENU select SETUP, select EDIT
USER LIST/OPTIONS, select USER (Name) from list, select USER
LEVEL, select the desired level by selecting either NOVICE or
ADVANCED. To store the changed user level setting return to the
MAIN MENU. The unit will then display the message STORING
SYSTEM DATA.
Storing Product Test Results in Automatic mode
The Product Test Results will not be stored until the end of the test
sequence and any COMMENTS menu (if it has been setup) is
appropriately acknowledged. The unit will then display the message
STORING RESULTS. Your results have now been stored in memory.
This will be confirmed when the next P
Product menu box appears.
Storing Product Test Results in Manual mode
The Product Test Results can be stored by selecting the ‘Begin
Product’ field, when in Manual Mode. Enter a product number, either
using the encoder or the barcode scanner, and select OK to start
saving the results to that product name. The tester will store the
results locally, but will not save these results to the results memory,
until the ‘End Product’ field has been selected. The user will be
prompted to enter a comment for the product to be stored.
Storing System Data
System Data consists of everything changed from within the SETUP
MENU. To store the System Data return to the MAIN MENU from the
SETUP MENU. The unit will then display the message STORING
SYSTEM DATA. This will only be done if changes have been made; if
no changes have been made then the system data will not be updated.
Waiting for a Yes/Cancel response
When you are prompted to respond with YES or CANCEL (NO) you
must use the Fast keys under the display.
Your HAL tester