Seaward ClareHAL - Manual (Page 70)

69
Edit Site List
Note
If you change the name of the site during testing all of the
previous tests will still be referenced to the old site name; this
gives unlimited amounts of sites within memory.
Edit Site Name
Select S Setup from Main Menu. The setup screen will be displayed.
Select S Site list using fast key or highlight E Edit Site List and press Green
to enter. Use the encoder to highlight a site name and press E Edit Name
fast key or press Green to select the desired option. You will be
prompted to edit the existing site name. Select data fields with cursor
and press IInsert key as required. Then press G
Green followed by R Red to
accept new site name. Pressing R Red during any changes will abort Edit
mode.
Your HAL tester