Seaward ClareHAL - Manual (Page 69)

68
Beep on Tests
Use the encoder to highlight a buzzer option and press Green to select
the Yes/No option. If Yes is selected this option will beep whenever the
High Voltage Test in progress icon is displayed or when a test has
failed.
Beep on Barcodes
Use the encoder to highlight a buzzer option and press Green to select
the Yes/No option. If Yes is selected this option will beep whenever a
barcode has been received.
Beep on Warning
Use the encoder to highlight a buzzer option and press Green to select
the Yes/No option. If Yes is selected this option will beep whenever a
warning message is displayed to alert user.
Saving User Settings
After all changes have been made to the ‘E Edit User Settings’ press OK
fast key to save these user settings. Then press Red to move back to
Setup screen.
Your HAL tester