Seaward ClareHAL - Manual (Page 146)

145
6. System Settings Identifiers
SSSID_SOFTWARE_VERSION (Item_id = 0)
This read-only item is a string representing the software version
number (eg "SNEU.26a", "AUNZSA.26a_beta3").
SSSID_HARDWARE_VERSION (Item_id = 1)
This read-only item is a string representing the hardware version (eg
1.23, 7.24, etc).
SSSID_SERIAL_NO (Item_id = 2)
This read-only item is a string representing the tester's serial number.
SSSID_CALIB_BY (Item_id = 3)
This read-only item is a string representing the name of the person or
calibration rig that calibrated the tester.
SSSID_CALIB_AT (Item_id = 4)
This read-only item is a string representing the name of the place at
which the tester was calibrated.
SSSID_CALIB_TIME (Item_id = 5)
This read-only item is a structure representing the date and time at
which the tester was calibrated. The date and time structure is defined
within the 'Data Representation' chapter.
SSSID_NUM_SERVICES (Item_id = 6)
This read-only item is an unsigned integer representing the number of
times tester has been serviced. The value will be defined using either 1
or 2 bytes.
SSSID_TOTAL_APPLIANCES (Item_id = 7)
This read-only item is an unsigned integer representing the total
number of products/appliances that have been tested by the tester.
The value will be returned using up to 4 bytes.
Your HAL tester