Seaward ClareHAL - Manual (Page 151)

150
SSSID_DL_SETTINGS (Item_id = 42)
This read/write item is an array of structures representing the
configuration of downloads.
Each structure contains exactly 7 bytes.
Valid instances are 0 through 1 inclusive. Instance 0 defines the
settings to be used for normal downloads, while instance 1 defines the
settings to be used when performing an auto-download after a test.
SSSID_PASSWORD (Item_id = 43)
This read/write item is a string representing the tester's password. This
item is password protected - it is not possible to read/write this item
unless the session is unrestricted.
(Item_id = 44)
Not Used
(Item_id = 45)
Not Used
SSSID_FAILURE_ACTION (Item_id = 46)
This read/write item is an 8-bit unsigned integer representing the action
to take if a test fails during automatic test mode. This item cannot be
written unless the session is unrestricted.
Valid values are 0 through 1 inclusive. 0=fail appliance, 1=show failure
menu.
SSSID_ROLL_PRINTER (Item_id = 47)
This read/write item is an 8-bit unsigned integer representing the type
of any connected roll printer.This item cannot be written unless the
session is unrestricted.
0=TSP400, 1=MARTEL
Your HAL tester