Seaward ClareHAL - Manual (Page 24)

23
Using Symbols in Text Fields
Although there is an option to use non-ASCII symbols as Product
numbers, Site & Location descriptions, User names and comments
does not guarantee that your computer software will support them. If
you are unsure avoid using symbols.
15 Digit Restriction
The maximum Product ID length is 15 characters while the maximum
line for the comments is extended to 20 characters per line.
Setting up a Password
The Tester is delivered without any password set up. Therefore it is
necessary to set in place an appropriate password for the protection of
the System Setup. To do this select Setup from Main Menu, and then
select Change Password and you will be prompted for password entry.
Also see section on Change Password for instructions.
Remember: Keep the password discreet for use with authorized users
only. It may be useful to print the password in Barcode format for quick
entry using the Barcode scanner.
Abbreviation used:
Press Green – denotes pressing the GREEN (Start) button
Press Red - denotes pressing the RED (Reset) button
Your HAL tester